Operating instructions
15
HT-SB500
2009 October 29
HT-SB500_A6_EN_US.fm
Preparation for Use
Speaker connections to TVs (continued)
Connecting to a TV
If the TV/monitor has an audio output, connect it to the LINE IN
1 jacks on the rear of the speaker.
To select LINE IN 1 function:
On speaker: Press FUNCTION button repeatedly until “L1” is
displayed.
On remote control: Press LINE 1-2 button repeatedly until
“L1” is displayed.
Connecting to a TV (with Headphone jack)
If the TV/monitor has headphone jack, connect it to the LINE IN
2 jack on the rear of the speaker.
To select LINE IN 2 function:
On speaker: Press FUNCTION button repeatedly until “L2” is
displayed.
On remote control: Press LINE 1-2 button repeatedly until
“L2” is displayed.
Notes:
If the TV volume is continuously in low level, the speaker will
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
If the speaker volume is continuously in very high level, the
speaker will mute and recover after several seconds.
The information display on the sound bar system will not
display anything when increasing or decreasing the volume
level.
To audio output jacks
RCA cable (supplied)
Speaker
TV
To LINE IN 1
jacks
HEADPHONE
To HEADPHONE jack
Audio cable (not supplied)
Speaker
TV
To AUDIO LINE
IN 2 jack