Operating instructions

12
HT-SB500
2009 October 29 HT-SB500_A6_EN_US.fm
Preparation for Use
Note:
Make sure all screws are fully tightened. (screws are not
supplied)
 Installing the speaker
4 Screw the wall mount angle to the wall as shown in the
illustration. (Total screw is 8 pieces)
Wall surface
Wall mount angle
Wall mount angle
Wall surface
Wall surface
Wall mount angle
(screws x 4)
(screws x 4)
1 Align the wall mount slot at the speaker to the wall
mount angle.
2 Slot the speaker into the wall mount angle.
3 Fix them securely.
Wall surface