Manual

Digitalconnection:
ConnecttotheTVusinganopticaldigitalaudio
cableoracoaxialdigitalaudiocable.
Tooptical
TV digitalaudio
Coaxialdigital
audiocable
(commercially
available)
ToCOAXIAL
inputsocket
Sound
bar
To selectDIGITAL! (coaxial input} or DIGITAL
2 (optical input) function:
¢ On theunit: PressFUNCTIONbuttonrepeat-
edlyuntil 'dl" or"d2" isdisplayed.
¢ Onremotecontrol:PressDIGITAL1orDIGITAL
2buttonand "dl" or "d2" isdisplayed.
Analog connection:
IftheTV/monitorhasanaudiooutput,connectittothe
LiNEIN1 orLINEIN2jacksontherearoftheunit,
To select LINEINi or LINEIN 2function:
¢ On theunit: PressFUNCTIONbuttonrepeat-
edlyuntil 'LI" or"L2" isdisplayed.
¢ On remotecontrol:PressLINEbuttonrepeat-
edlyuntil "LI" or"L2" isdisplayed.
Notes:
¢ If theTV volumeis continuouslyin low level,
the unit will automaticallypoweroff. increase
the TVoutput volumeto enjoythe soundfrom
the speaker.
¢ If thespeakervolume is continuouslyin very
highlevel,the unit willmuteand recover after
3seconds.
jack
Connectto the digitaltuner,etc, usingan optical
digitalaudiocableor acoaxialdigitalaudiocable.
To select DIGITAL1(coaxial input} or DIGITAL
2 (optical input} function:
€ On the unit: PressFUNCTIONbuttonrepeat-
edly until "dl" or "d2"is displayed.
€ On remotecontrol:PressDIGITAL1orDIGITAL
2 buttonand "dl" or 'd2" is displayed.
To coaxialdigitalaudio
Soundbar
Note:
Whenconnectingwith anopticaldigitalcable,set
thedigitaloutputof thedigitaltunerto PCM.Refer
to theoperationmanualof thedigitaltuner.