MODEL HT-SB32D SOUND BAR HOME THEATRE SYSTEM soft OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. barcodesoft.com ON/ Y STAND-B MUTE CINEMA MODE SOUND MUSIC SURROUN D NEWS INPUT mbology: Code 93; Font Facename: Code93MHr code: TINSEA482AWZZ BYPASS TV CH VOL VOL RRMCGA : 0: 322AWSA Bluetooth SIG, Inc.
Accessories The following accessories are included.
Precautions ●● This unit should only be used within ■■ General the range of 5°C - 35°C (41°F 95°F). ●● Keep your equipment at least 10 cm of free space along the sides, top and back for proper ventilation. 10 cm 10 cm 10 cm ●● SHARP is not responsible for dam- age due to improper use. Refer all servicing to a SHARP authorised service centre. Warning: ●● The supplied AC/DC adaptor contains no user serviceable parts. Never remove covers unless qualified to do so.
Controls and indicators ■■ Front Panel SOUND BAR HOME THEATRE SYSTEM HT-SB32D 1 3 4 5 67 2 8 9 1011 12 13 14 1. 2. 3. 4. 5. 6. 7. 8. 9. Left Channel Speakers Right Channel Speakers On/Standby/Input Indicator On/Standby Button Input Button Pairing Button Pairing Indicator Surround Indicator Surround Button 10. 11. 12. 13. 14. Volume Down Button Volume Up Button Audio Format Indicator Remote Sensor NFC detection area ■■ Rear Panel 1. DC In Socket 2. Optical In Socket 3.
Controls and indicators (continued) ■■ Remote Control 1 ON/ STAND-BY MUTE 2 3 4 5 6 7 CINEMA SOUND MODE MUSIC NEWS BYPASS SURROUND INPUT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
System preparation Make sure to unplug the AC power lead before installing the sound bar or changing the position. ■■ Installing the sound bar 1 Fix the pattern paper to the wall in hori- Using spike legs zontal position as below. 548 509 mmmm Wall surface 44 mm 1 Peel the double sided tape separator. Double sided tape separator Spike leg Pattern paper (supplied) 2 Fix the spike leg onto the sound bar as shown.
Placing the sound bar Notes: Installation image: ●● Remove the protective film covering the sound bar before turning on the system. ●● The front panel of the sound bar is not removable. Caution: ●● Do not change the installation direction when the sound bar is turned on. ●● Do not stand or sit on the sound bar as you may be injured. TV Place the sound bar as shown.
Falling prevention (continued) ■■ When mounting on the wall Screw eye (not supplied) Safety wires (not supplied) SOUND BAR HOME THEATRE SYSTEM HT-SB32D Wall Sound bar ■■ When placing on the shelf/table Sound bar Safety wires (not supplied) Rack/ table Screw eye (not supplied) 8 Screw eye (not supplied)
Sound bar connections to TVs Caution: Turn off all other equipment before making any connections. Notes: ● To connect to TV/player, use AUDIO IN or OPTICAL IN terminals located at the rear of the sound bar. ● Refer the operation manual of the equipment to be connected. ● Fully insert the plugs to avoid fuzzy pictures or noises. ● If the TV volume is continuously at low level, the sound bar will automatically power off. Increase the TV output volume to enjoy the sound from the speaker.
AC power connection After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then to the wall socket. ■■ Using with the AC/DC adaptor 1 Plug the AC power lead into the AC/DC adaptor. 2 Plug the AC/DC adaptor cable into the DC INPUT socket on the sound bar. 3 Plug the AC power lead into an wall socket. The PAIRING indicator turns BLUE.
Remote control Notes concerning use: ●● Replace the battery if the operating distance is reduced or if the operation becomes erratic. Purchase “CR 2025”, coin lithium battery. ●● Periodically clean the transmitter on the remote control and the sensor on the sound bar with a soft cloth. ●● Exposing the sensor on the sound bar to strong light may interfere with operation. Change the lighting or the direction of the sound bar if this occurs.
General control Notes: ■■ To turn the power on ●● When volume is maximum or minimum the Press the ON/STANDBY button. The On/Standby/Input Indicator lights up according to input source: Input source On/Standby/Input Indicator OPTICAL IN Turns green AUDIO IN Turns cyan SURROUND indicator blinks 3 times ●● To increase or decrease the volume continuously, press and hold the VOLUME +/- buttons (main unit) or VOL +/- buttons (remote control).
General control (continued) ■■ Auto power on function ■■ Auto power off and auto detect signal ●● Auto power on function works only during Bluetooth standby mode (PAIRING indicator is blue). It will not work if the sound bar is in low power consumption mode (PAIRING indicator is off). Optical In: Turn off the external source. The sound bar will automatically power ON if the external source is turned ON again.
Bluetooth one touch connection via NFC Unlike other wireless technology, NFC requires no discovery or pairing. Simply tap the source device to NFC detection area on the main unit or the NFC tag to instantly enjoy seamless connectivity between your smart device and the audio system.
Bluetooth one touch connection via NFC (continued) 1 Peel the separator off the velcro tape (loop Then place the tag onto the desired location. type) and stick it on a desired surface. Separator Separator Velcro tape (loop type) Velcro tape (hook type) rear view of the NFC tag 2 Peel the separator off the velcro tape (hook type) and stick it to the rear of the NFC tag. ■■ NFC connection for audio playback Check that: ●● Your device (smartphone/tablet) has an NFC function.
Listening to Bluetooth enabled devices Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 10 metres (30 feet) without the hassle of having to use cables to connect these devices. This sound bar supports the following: Communication System: Bluetooth Specification version 2.1 Bluetooth + Enhanced Data Rate (EDR).
Listening to Bluetooth enabled devices (continued) Notes: ●● If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4 GHz frequency is placed near the system some sound interruption may be heard. ●● The transmission distance of the wireless signal between the device and the sound bar is about 10 m, but may vary depending on your operating environment.
Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service center. No sound is heard. ●● Is the sound bar too far Bluetooth sound is interrupted or distorted. ●● Is the sound bar too near ■■ General Symptom No sound is heard.
Troubleshooting chart Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There may be some deviations from these values in individual unit.
For Australia and New Zealand customers SHARP FORLOCATION LOCATIONENQUIRIES ENQUIRIESWITHIN WITHIN FOR AUSTRALIA AUSTRALIA REGARDINGYOUR YOURLOCAL LOCAL REGARDING SHARPAPPROVED APPROVEDSERVICE SERVICECENTRE CENTRE SHARP VISITOUR OURWEBSITE WEBSITEAT AT VISIT www.sharp.net.au www.sharp.net.
For Australia and New Zealand customers WARRANTY Consumer Electronic Products Congratulations on Your Purchase! This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
