Operating instructions
16
HT-SB300
2008 December 5
HT-SB300_A6_EN
Preparation for Use
Speaker connections to TVs (continued)
■
Connecting a digital tuner, etc.
Connect to the digital tuner, etc. using an optical digital audio
cable or a coaxial digital audio cable.
To select DIGITAL 1 (coaxial input) or DIGITAL 2 (optical
input) function:
●
On speaker: Press FUNCTION button repeatedly until “d1” or
“d2” is displayed.
●
On remote control: Press DIGITAL 1 or DIGITAL 2 button and
“d1” or “d2” is displayed.
Note:
When connecting with an optical digital cable, set the digital
output of the digital tuner to PCM. Refer to the operation manual
of the digital tuner.
Coaxial digital audio cable
(commercially available)
Optical digital
audio cable
(commercially
available)
To COAXIAL
input jack
To the TV (video)
To OPTICAL
input jack
Speaker
To coaxial digital audio output jack
Audio signal
Audio signal
To optical
digital audio
output jack