Manual

HT-SB300
Dolby Pro Logic II
System expanding 2ch stereol
sound to more spacious sound. I
When setting Dolby Virtual speaker I
to "ON", Dolby Pro Logic II is
activated to enjoy the stereo sound I
effect. I
Lights up when Dolby Pro Logic II
s act rated.
• Subwoofer level control
The speaker level can be adjusted.
To increase the level, press the
SUBWOOEER LEVEL + button.
To decrease the level, press the
SUBWOOFER LEVEL - button. 5,_ 4 ... _4_5
Note:
When sound from the speaker is distorted, decrease the
subwoofer level.
• Bass control
1. Press the BASS/TREBLE button
to select "BASS". _
2. Within 5 seconds, press the -_>
VOLUME (+ or -) button to adjust
the bass.
• Treble control
1. Press the BASS/TREBLE button
to select "TREBLE". [_
2. Within 5 seconds, press the -...e
VOLUME (+ or -) button to adjust
the treble.
• Function
On speaker:
When the FUNCTION button is
pressed, the input source will change.
Press it repeatedly to select desired
input source.
On remote control:
Press the LINE button repeatedly to
select "LI" (LINE IN 1 input) or "L2"
(LINE IN 2 input).
Note:
The backup function will protect the memorized function mode
for a few hours should there be a power failure or the AC power
cord becomes disconnected.
Auto power on function:
When you press the LINE / DIGITAL 1 / DIGITAL 2 button on the
remote control, the speaker will turn on at the selected function.
Auto power off and auto detect signal:
• If no analogue signal is detected within 1 minute or if"d 1"/"d2"
display is blinking for 30 seconds during power on, the
speaker will automatically go to stand-by mode. The STAND-
BY indicator turns orange.
• The speaker will automatically power ON if it detects audio
signal from connected equipment.
21