Manual

General control (continued)

HT SB300

• DolbyVirtual Speaker (DVS) sound mode

The Dolby Virtual Speaker (DVS) creates virtual surrounds

comparable to the 5.1ch sound produced by the 2.1ch speaker.

When setting DVS to "ON" for 2 channel stereo signals, Dolby

Pro Logic II brings out virtual sound effects through the signals

converted into 5.1ch.

Press the DVS button.

The Dolby Virtual Speaker indicator lights up.

[ mooLo

Notes:

• Monaural signals do not generate surround effects.

• DVS sound effect may not be obtained depending on signal

types (the Dolby Virtual Speaker indicator blinks), in this

case, set the DVS mode to "OFF".

ThesoundDOlbYeffects.VirtualSpeaker creates multichannel-like

Compared with the cinema mode, the bass sound

level is slightly reduced.

The Dolby Pro Logic II indicator also lights up if 2ch

sound signals are detected.

• DVS can only be turned on using remote control.

• if you turn ON DVS, WOW HD will automatically turn OFR

• The DVS can be turned OFF by pressing any of the preset

sound mode buttons.

This product incorporates decoders supporting the Dolby Digital

system and DTS system.

DTS (Digital One of the digital audio systems for I

theatrical use. As the sound quality

is emphasized, you can enjoy the

Theater realistic sound effect in the home I

Systems) theater system.

Lghts up when detectng DTSsignal.

Dolby Digital

One of the digital audio systems for I

theatrical use. You can also enjoy I

the stereophonic effect in the home I

theater system. I

Lights up when detecting Dolby

Dgta sgna.