Manual

General control HTSB300

ONISTAND-BY -- VOL, -}- I

• To turn the power on

Press the ON/STAND-BY button,

• The power indicator turns green. If the power does not turn

on, check whether the power cord is plugged in properly.

To set the speaker to stand-by mode:

• Press the ON/STAND-BY button again.

The STAND-BY indicator turns red.

• Display brightness control

Press the DIMMER button to adjust the brightness of the display

and sound mode indicator.

Sound mode indicator and display bright

Sound mode hldlcator and display dim

Sound mode indicator and display off. Pressin

any button will light up the display for 3 seconds only.

• Volume auto fade-in

If you turn off and on the speaker with the volume set to 40 or

higher, the volume starts at 20 and fades in to the last set level.

• Volume control

Speaker operation:

Pressvolumeup(VOL.+)toincrease _ _the volume and press volume down +--_

(VOL-) to decrease the volume, oo-ol _02 ...... 59_60

Remote control operation:

Press the VOLUME + button to increase the volume and the

VOLUME - button to decrease the volume.

• Muting _,_

The volume is muted temporarily when pressing _

the MUTE button on the remote control. Press

again to restore the volume. _141411414i\_

• Preset sound mode

Main unit operation:

When the SURROUND button is pressed, the current mode

setting will light up. To change to a different mode, press the

SURROUND button repeatedly until the desired sound mode

lights up.

Remote control operation:

Press a desired sound mode on the remote control.

STANDARD CINEMA/GAME

SPORT NEWS

STAI_DARD WOW HD off

IICINEM_'GAME WOW HD on for cinema/game sound effect

SPORT WOW HD on for sport broadcasting

NE{WS WOW HD on for news