Thank you for purchasing this SHARP product. To obtain the best performance from this product, manual carefully. It will guide you in operating your please SHARP read this product. Accessories Please confirm that only the followin Remote control x 1 (RRMCGA178AWSA) Length: AC power cord x 1 (QACCDA005AWZZ) are included.
HTS_300 SPECIAL NOTES NOTE il¸¸ CAUTION:TO i REDUCETHE DO NOT REMOVE COVER NO USER-SERVICEABLE SERVICING RISK OF ELECTRIC (OR BACK), PARTS TO QUALIFIED Explanation SERVICE of Graphical The lightning SHOCK, INSIDE, REFER PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
HTS_300 IMPORTANT SAFETY INSTRUCTIONS 18) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions.
Notes Contents HT-SB300 Page ENERGY STAR ® Program information • General Precautions Products the that ENERGY designed superior ENERGY Manufactured STAR ® is a U.S. STAR ® are to protect environment Controls have earned registered ............................... and indicators .................. • Preparation for Use Speaker preparation ................... Placing the speaker ........................ Falling prevention ......................... Speaker connections to TVs ............
H%SB300 Precautions • Please ensure that the equipment is positioned in a wellventilated area and ensure that there is at least 4" (10 cm) of free space along the sides and top of the equipment. • Use the speaker • Keep the speaker away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise. Do not place anything on top of the speaker.
Controls and indicators HT-SB300 12 3 6 7 8 91011 16 17 • 45 12 13 1415 18 18 17 19 Front Panel Reference 1. 2. Sport Indicator ........... Standard Indicator ........ 3. 4. 5. Information Display ....... Cinema/Game Indicator, News Indicator ........... 6. DTS Indicator 7. Dolby 8. 9, On/Stand-by Button ...... Volume Down Button ..... 10. Volume Indicator ............ .......... Up Button ........ ,, ................ ................ ................ ................ ..........
HTSB300Controls and indicators (continued) 1 • Rear 2 3 Panel Reference 1. Audio Line In 2 Jack ........................ 2, Line In 1 Jacks ............................ 3. DC IN Jack ............................... 4, Coaxial Digital Audio Input Jack .............. 5, Optical Digital Audio Input Jack .............. 6. Subwoofer Pre Output Jack .................
Hq:SB300 • 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. -10 -11 -12 2_ 3-4-5_ 13 14 15 16 6-7-8-- Remote 17 18 Remote Control Transmitter ...... Dolby Virtual Speaker Button ..... Cinema/Game Button ............ Standard Button ................ Volume Up Button .............. Subwoofer Level Down Button .... Volume Down Button ........... Bass/Treble Button ............. TV Operation Buttons .......... On/Stand-by Button ............ Sport Button .................. News Button ....
HTSB300 Speaker preparation Using foot cushions I I the Makespeaker sure toorunplug the the AC position. power cord before installing changing Select from three preferred position. [Usingspikes installation methods according to the ] You may choose from the two different 25 mm and 30 mm. spike lengths provided: Nuts (secured on 30 mm spikes) must be used when installing either the 25 mm or 30 mm spikes. The speaker can be leveled by adjusting the spikes and nuts.
HT-SB300 • I To mount the speaker on the wall I Caution: • Be very careful to prevent the speaker [3.88 Ibs. (1.75 kg)] from falling when mounting on the wall. • Before mounting, check the wall strength. (Do not put on the veneer plaster or whitewashed wall. The speaker may fall.) if unsure, consult a qualified service technician. • Mounting screws are not supplied. Use appropriate ones. • Check all wall mount angle screws for looseness.
HT SB300 Speaker preparation (continued) 4 • Installing the speaker Screw the wall mount angle to the wall as shown in the illustration. 1 Align (Total screw is 8 pieces) the wall mount slot at the speaker mount angle. Wall mount angle x 4) Note: Make sure all screws are fully tighten.
Placing the speaker Installation HT-SB300 image: • Using other subwoofer You can connect a subwoofer SUBWOOFER PRE OUT jack. with an amplifier to the Commercially available subwoofer Audio cable (amplifier built in) commercially available) i To audio input {._.__.j _To SUBWOOFER PRE !jack Place the speaker as shown. Notes: • As the sound from the speaker • Caution: • Do not change the installation turned on. • is omni-directional, you can place the speaker anywhere you like.
HT SB300 Falling prevention Safety wires (not supplied) from falling off the table. Speaker connections to TVs are useful to prevent the speaker Caution: Turn off all other equipment before making any connections. Tuner receiving for other audio system • Placing the antenna near the speaker AC power cord may cause noise pick up. Place the antenna away from the speaker for better reception. Notes: • To connect to TV, use either LINE IN 1 jacks or AUDIO LINE IN 2 jack only.
HT-SB300 •Ifthe Connecting toaTV TV/monitor has anaudio output, connect ittotheLINE IN 1jacks ontherear ofthe speaker. Toselect LINE IN1function: • On speaker: Press FUNCTION button repeatedly until "LI" is • displayed. On remote control: Press LINE button repeatedly displayed. until "LI" is • Connecting to aTV (with Headphone jack) If the TV/monitor has headphone jack, connect it to the LINE IN 2 jack on the rear of the speaker.
HTSB300Speaker connections to TVs (continued) • Connecting a digital tuner, etc. Connect to the digital tuner, etc. using an optical digital audio cable or a coaxial digital audio cable. To coaxial digital audio output jack _ I_ I _ To select DIGITAL 1 (coaxial input) or DIGITAL 2 (optical input) function: • On speaker: Press FUNCTION button repeatedly until "dl" or "d2" is displayed. • On remote control:Press DIGITAL 1 or DIGITAL 2 button and "dl" or "d2" is displayed. .....
AC power connection HT-SB300 After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then to the AC outlet. • Using with the AC/DC AC/DC Adaptor Cable adaptor DC IN jack 1 Plug the AC power cord into the AC/DC adaptor. 2 Plug the AC/DC adaptor 3 the speaker. Plug the AC power cord into an AC outlet, The STANDBY indicator will turn RED when AC power is applied.
HTSB300 Remote control • Battery installation This product contains a CR Coin Lithium Battery which contains Perchlorate Material - special handling may apply, California resident& see www.dtsc.ca.gov/hazardouswaste/perchlorate/ Caution: • Do not use rechargeable etc.). 1 • Insert pin into the battery holder. hole as shown and pull to open the • • remBo?C_ • 2 Remove the old battery from the battery holder, insert the new battery and then slide the battery holder back into the remote control.
General control HTSB300 • @ Volume Speaker control operation: Pressvolumeup(VOL.+)toincrease the volume and press volume (VOL-) to decrease down the volume, _ oo-ol +--_ _ _02 ...... Remote control operation: Press the VOLUME + button to increase the volume VOLUME - button to decrease the volume. ONISTAND-BY -- VOL, -}- and the I I • To turn the power on Press the ON/STAND-BY button, • The power indicator turns green.
HT SB300 General control (continued) • DolbyVirtual Speaker (DVS) sound mode The Dolby Virtual Speaker (DVS) creates virtual surrounds comparable to the 5.1ch sound produced by the 2.1ch speaker. When setting DVS to "ON" for 2 channel stereo signals, Dolby Pro Logic II brings out virtual sound effects through the signals converted into 5.1ch. Notes: • Monaural signals do not generate surround effects.
HT-SB300 • System expanding 2ch stereol sound to more spacious sound. I When setting Dolby Virtual speaker I to "ON", Dolby Pro Logic II is Dolby Pro Logic II activated to enjoy the stereo sound I effect. I Lights up when Dolby Pro Logic II s act rated. • Subwoofer level The speaker level can To increase the level, SUBWOOEER LEVEL To decrease the level, SUBWOOFER LEVEL Note: When sound from subwoofer level. • Bass 1. Press control be adjusted. press the + button. press the - button.
H%SB300 Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician.
Hq:SB300 Error indicators and warnings Specifications When you fail to perform operations properly, messages are displayed on the speaker. As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production speaker. There may be some deviations from these values in individual speaker.
CONSUMER LiMiTED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original con= tainer, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
