Operation Manual

EN
4. PREVIOUS – Press to return to the
previous track.
5.
Press to temporarily pause a
playback. Press it again to resume the
playback. Hold down this button for
3 seconds to disconnect bluetooth.
6. EQUALIZER press to switch be-
tween preset sound modes (Music/
Movie/News)
7. MUTE Press to temporarily switch
o the sound. Press it again to switch
it on.
8. BT Press to enter the BT (Bluetooth)
mode.
9.
NEXT – Press to return to the
previous track.
10. OPTICAL/ARC Press to enter the
OPTICAL IN mode or ARC mode.
RC OPERATIONS
Insert the battery into the remote control.
Point the remote control at the remote
sensor on the front panel. The remote
control works within a distance of about
8 metres from the sensor and within an
angle of about 30 degrees from the left
and right side.
BATTERY INSTALLATION
Remove the battery compartment co-
ver on the back of the remote control.
Insert one AAA/1.5V battery into the
battery compartment making sure that
the battery has been inserted with the
correct polarities matching the symbols
+, - as indicated inside the battery
compartment.
Place the battery compartment cover
back onto the Remote control
First time installation
Placement and Mounting
AB
A1
A: Normal Placement (A1 - Attach
the silicone feet to the bottom of the
soundbar.
Place Soundbar on leveled surface in
front of TV.)
B: Wall Mounting
Wall Mounting
NOTE:
Installation must be carried out by
quali ed personnel only. Incorrect
assembly can result in severe personal
injury and property damage (if you
intend to install this product yourself,
you must check for installations such
as electrical wiring and plumbing that
may be buried inside the wall). It is the
installer’s responsibility to verify that
the wall will safely support the total
load of the unit and wall brackets.
Additional tools (not included) are
required for the installation.
Do not overtighten screws.
Keep this instruction manual for future
reference.
Use an electronic stud  nder to check
the wall type before drilling and
mounting.