Specifications

E-60
ENGLISH
8
HT-DV40H
HT-DV50H
Advanced Features
 Sleep operation
The radio, discs and USB can all be turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
 To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD the next morning.
1 Play back the desired sound source.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
or button to select
“SLEEP”, and press the
MEMORY/DIMMER button.
4 Press the or button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
 3 hours - 5 minutes 5-minute intervals
 5 minutes - 1 minute 1-minute intervals
5 Press the MEMORY/DIMMER
button.
“SLEEP” will appear.
6 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
1 Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select “SLEEP
X : XX”.
“X : XX” is sleep remaining time.
 The remaining sleep time is displayed for about 10 seconds.
 You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY/DIMMER button (steps 4 - 5).
1 Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select “SLEEP
OFF”, and press the MEMORY/DIMMER button.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback (steps 2 -
10, pages 57 - 58).
Sleep timer setting
Timer playback setting
Sleep operation will
automaticall
y
sto
p
Timer playback start time
End time
1 minute - 3 hours Desired time