Service manual

HT-DP2500
– 8 –
If hight energy exceeding X is detected, VOL is lowered to get sound easy to listen.
EXPLANATION OF AUTOMATIC SOUND VALUE CORRECTION CONTROL
1. Outline
The recent trend is toward rise of CD record level in the world, for example rock, dancing music, etc. In case of continuous high
level playback G-EQ (graphic equalizer) and VOL (Volume) are controlled (lowered) automatically after a lapse of specific time
(10 minutes) so as to get the easy-to-listen sound level.
2. Explanation of operation
The CD playback operation is explained below.
X : Threshold value of control circuit operation
A : Hight energy (hatched area) exceeding X is detecated, and the control mode is set.
B : After a lapse of 10 minutes the control is started.
Data is fetched every 4
seconds to control.
Initial frequency
characteristics.
Hand L frequency char-
acteristics are lowered.
VOL (Volume) is lowered.
Stable control
Continued control
The output data is fetched every 4 seconds to control. When quiet music is played back, the
control is performed so as to restore the initial frequency characteristics and initial VOL values.
Control mode cancel conditions
When output exceeding X is not given
continuously for 10 minutes.
When quiet music is played back.
When VOL is lowered.
When the power is turned off or on.
B ~ C :
C ~ D :
A
X
B C D
0w
10 minutes
Distortion clip point
SP output
level