User Manual

13
Contents/Precautions
Caution
If the display is broken and the internal substance
etc. then leaks, do not get it on your skin (face,
hands, etc.), clothes, etc.
May result in damage to your eyes, skin, etc.
If the internal substance etc. comes into contact with your
eyes, mouth, skin or clothes, immediately rinse the
contacted area with clean water.
Also, if it comes into contact with your eyes or mouth, seek
medical treatment immediately after rinsing the contacted
area.
Do not dispose of the wireless router in ordinary
garbage. May cause fires, burns, bodily injury, etc.
because of catching fire. Also, may damage to the
environment. Take the unnecessary wireless router to a
sales outlet such as a ●●● Shop or follow the instructions
by a local institution that handles used wireless routers.
If the substance etc. inside the internal battery
leaks, do not get the liquid on your skin (face,
hands, etc.).
May result in damage to your eyes, skin, etc.
If the internal substance etc. comes into contact with your
eyes, mouth, skin or clothes, immediately rinse the
contacted area with clean water.
Also, if it comes into contact with your eyes or mouth, seek
medical treatment immediately after rinsing the contacted
area.
When removing the nano UIM card, be careful
with the tip of the SIM eject tool or paper clip not
to injure any part of your body such as fingers.
May cause bodily injury etc. if you touch the tip of the
SIM eject tool or paper clip.
If you use the wireless router in a vehicle, contact
the vehicle manufacturer or dealer to check
whether the operation of the vehicle is affected by
signals. May interfere with the operation of electronic
equipment in some vehicle models. In this case, stop
using the wireless router.
If any trouble on your skin occurs due to using
the wireless router, immediately stop using it and
seek medical treatment. Use of the wireless router
may cause itching, rashes, eczema, etc.
depending on your constitution or health
condition.
Refer to the following for details on materials of each part.
☞
P. 17 “Material list”