Introduction Thank you for purchasing “xxxx”. Be sure to read this manual before and during use to ensure proper operation. z The screens and illustrations in this manual are shown as examples. The actual screens and illustrations may differ. z Note that “xxxx” is referred to as “Wireless router” in this manual. z Reproduction of this manual in part or in whole without prior permission is prohibited. z The contents of this manual are subject to change without prior notice.
Basic package Quick Start guide (in Japanese only) Notes on usage (in Japanese only) The following items are not included in the package. • AC adapter • USB Type-C cable • Purchase a specified charger (sold separately).
*1 Precautions (ALWAYS FOLLOW THESE DIRECTIONS) Before use, read these “Precautions” carefully and use your wireless router properly. These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times. The following symbols indicate the different degrees of injury or damage that may occur if information provided is not observed and the wireless router is used improperly.
“Precautions” is explained in the following sections. z Handling the wireless router, adapters, nano UIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.8 zHandling the wireless router. . . . . . . . . . . . . . . . . . . . . . . . . . P.10 z Handling adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.14 z Handling nano UIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.16 z Handling near electronic medical equipment. . . . . . . . . . . . . P.
Do not attempt to disassemble or modify the equipment. Do not allow conductive materials (such as metal objects and pencil lead) to come into contact with the charger terminal or external connection jack or dust to get inside it. May cause fires, burns, bodily injury, electric shock, etc. Do not get the equipment wet with liquids such as water (drinking water, sweat, seawater, pet urine, etc.). May cause fires, burns, bodily injury, electric shock, etc.
If any trouble such as an unusual odor, unusual noise, smoking, overheating, discoloration or deformation is found during use, charge or storage, follow the instructions below. Do not place the equipment where the young children can reach it. A young child may swallow the equipment, or suffer bodily injury, electric shock, etc. z Unplug the power plug from the outlet or accessory socket. z Turn off the wireless router. May cause fires, burns, bodily injury, electric shock, etc.
Do not apply excessive force on the wireless router such as puncturing it with a nail (sharp object), hitting it with a hammer (hard object) or stepping on it. May cause fires, burns, bodily injury, etc. because of catching fire, exploding, overheating or leaking of the internal battery. If the substance etc. inside the wireless router comes into contact with your eyes or mouth, immediately rinse the contacted area with clean water. Then seek prompt medical treatment.
Turn off the wireless router near high-precision electronic devices or devices that use weak electronic signals. May interfere with the operation of electronic devices. ※Take particular care with the following devices Hearing aids, implanted cardiac pacemakers, implanted cardioverter-defibrillators, other electronic medical equipment, other equipment controlled by electronic signals, etc.
Caution If the substance etc. inside the internal battery leaks, do not get the liquid on your skin (face, hands, etc.). May result in damage to your eyes, skin, etc. If the internal substance etc. comes into contact with your eyes, mouth, skin or clothes, immediately rinse the contacted area with clean water. Also, if it comes into contact with your eyes or mouth, seek medical treatment immediately after rinsing the contacted area. If the display is broken and the internal substance etc.
Do not short-circuit the charger terminal when connected to an outlet or accessory socket. Also, do not allow any part of your body (hands, fingers, etc.) to come into contact with the charger terminal. May cause fires, burns, electric shock, etc. Do not place heavy objects on the cord of the adapter or apply excessive force on it such as pulling it. Look at the display in a well-lit place, keeping a certain distance. Eyesight may be weakened etc. if you look at it in a dark place or closely.
When plugging/unplugging an adapter into/from the wireless router, plug/unplug it straightly toward the terminal to connect, not applying excessive force on it such as pulling the cord. Always use the specified power supply and voltage. When using overseas, use the AC adapter that is available overseas. Using the incorrect power supply and voltage may cause fires, burns, electric shock, etc.
Handling near electronic medical equipment Caution Warning Do not touch the adapter for a long time when connected to an outlet or accessory socket. If you have electronic medical equipment such as an implanted cardiac pacemaker or an implanted cardioverter-defibrillator, always carry or use your wireless router at least 15 cm away from your implant. Electromagnetic signals may have harmful May cause burns etc.
Material list If there is any chance that the distance between the wireless router and a person closest to you may get shorter than 15 cm such as when you cannot freely move around, set the wireless router not to emit radio wave in advance (by setting Airplane mode, turning the power off, etc.).
Handling the sample (SIM eject tool) Warning The tip of the SIM eject tool is sharp. Do not use it pointing at yourself or others. May hit you or others around you, resulting in bodily injury, loss of eyesight, etc.
z Use only optional parts specified by ●●●. May cause a malfunction or damage when optional parts other than those specified by ●●● are used. z Read the respective user's guides supplied with supported optional parts carefully. z Do not drop or otherwise subject the equipment to severe impact. May cause a malfunction or damage. z Clean only with a soft and dry cloth (such as the type used for eyeglasses). Notes about the wireless router y Forceful rubbing of the display with a dry cloth etc.
z When connecting an external connector device to the external connection jack, do not put it in obliquely and do not pull it while it is plugged in. z The internal battery is not covered by warranty because it is a consumable product. Depending on usage, the internal battery may swell as it approaches the end of its usable life. Change the battery if the its life becomes extremely shorter or the it swells even after fully charged.
Notes about adapters z Clean only with a soft and dry cloth (such as the type used for eyeglasses). z To protect the environment, please take any unneeded nano UIM cards to a sales outlet such as a ●●● Shop. z Do not damage, touch haphazardly or short-circuit the IC. z Charge the battery in areas where the ambient temperature is between 5℃ and 35℃ . z Do not charge the internal battery in the following locations.
Notes about wireless LAN (WLAN) z Wireless LAN (WLAN) uses radio waves to communicate information. Therefore, it has an advantage of freely connecting to the LAN within the service area. On the other hand, if security setting is not set, it is possible for a malicious third party to intercept the communication contents or hack. It is recommended to set security setting at your own risk and judgement.
z Cautions on using 2.4 GHz devices WLAN-installed devices operate at radio frequencies assigned to the in-house radio stations for a mobile object identifier (radio stations requiring a license) used in production lines of a factory, specific low power radio stations (radio stations requiring no license), and amateur radio stations (radio stations requiring a license) in addition to industrial, scientific and medical devices or home electric appliances such as microwave ovens. 1.
Voluntary control for radio wave interference z This product satisfies technical requirements based on VCCI Rules for Voluntary Control Measures and its satisfied mark is displayed on the electronic nameplate of the product. You can see the electronic nameplate by operating the product as follows. In the home screen menu, ▶[ About Device] Notes about the sample (SIM eject tool) z Do not insert the SIM eject tool into the hole etc. other than those for ejecting the nano UIM Card.
Caution z Never use the wireless router that is modified. Using a modified device violates the Radio Law and/or the Telecommunications Business Law. The wireless router follows the regulations regarding the certification of conformity with technical regulations for specific radio stations etc. based on the Radio Law and authentication of conformity with technical regulations for devices etc.
Before Using the Wireless router Part names and functions 1 Display/Touch panel 1 z For details on operation of the touch panel P.42 “Operation of touch panel” ☞ 2 Reset button 3 nanoUIMcard 4 Powerkey 2 3 z Pressing it for at least 3 seconds to turn the power on while the power is turned off. Alternatively, pressing it for at least 2 seconds to use the menu such as [Power off], [Restart] and [Emergency mode] while the power is turned on. z Use to turn the display on/off.
3 Charging with AC adapter When charging with AC Adapter (sold separately), carry out the following operations. 1 2 Insert the Type-C plug of the AC adapter horizontally into the USB Type-C connection jack on the wireless router When charging is complete, pull the AC adapter power plug from the outlet and remove the Type-C plug of the AC adapter horizontally from the USB Type-C connection jack z Refer to user's guide of AC Adapter.
Turning display on/off Charging with USB Cable The display is turned off when 0 is pressed or the wireless router is not in use for a set length of time. Press 0 while the display is turned off to turn it on. You can charge the wireless router by connecting the wireless router to a PC with USB cable (sold separately) etc. Touch panel lock When the power or the display is turned on, the touch panel is locked. Touch [ ] to unlock.
Touch Touch a key or an item displayed on the screen and then release your finger from it to select or set it. Slide (Swipe)/Drag Move your finger while keeping it on the touch panel to scroll the screen or move an icon, a widget, etc. to the desired position. In addition, when you touch a menu or an item by mistake, move your finger away from it to cancel the selection.
Wi-Fi settings Home screen menu z If you select an access point protected by security, enter the password (security key) and select [CONNECT]. z To register access points manually: [Add network]▶enter the network name▶set security▶[SAVE] If you use the wireless router, you can use mail or Internet by connecting to access points of your home, corporate network or public wireless LAN service.
Specific Absorption Rate (SAR) of Mobile Phones This model xxxx mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves. This mobile phone was designed in observance of Japanese technical regulations regarding exposure to radio waves (*1) and limits to exposure to radio waves recommended by a set of equivalent international guidelines.
*2 *3 Regulatory information Including other radio systems that can be simultaneously used with LTE/FOMA. Including other radio systems that can be simultaneously used with LTE/FOMA. European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.
z Description of accessories USB cable LTE Band 28 Tx 704.5 to 746.5 MHz Rx 759.5 to 801.5 MHz WLAN 2.4 GHz Tx/Rx 2412 to 2472 MHz (BW: 20MHz only) For charging, peripherals, etc. z Frequency range of supported bands in EU WCDMA FDD I WCDMA FDD VIII LTE Band 1 LTE Band 3 LTE Band 8 Tx 1922.4 to 1977.6 MHz Rx 2112.4 to 2167.6 MHz Tx 882.4 to 912.6 MHz Rx 927.4 to 957.6 MHz Tx 1922.5 to 1977.5 MHz Rx 2112.5 to 2167.5 MHz Tx 1710.7 to 1784.3 MHz Rx 1805.7 to 1879.3 MHz Tx 880.7 to 914.3 MHz Rx 925.
z Maximum transmit power WCDMA FDD I WCDMA FDD VIII LTE Band 1 LTE Band 3 +24 dBm (Power Class3) +24 dBm (Power Class3) +23 dBm (Power Class3) +23 dBm (Power Class3) LTE Band 8 +23 dBm (Power Class3) LTE Band 28 +23 dBm (Power Class3) WLAN 2.4 GHz +18.5 dBm (ANT0+ANT1) FCC Notice z This device complies with part 15 of the FCC Rules.
Information to User This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
