User's Manual

44 45
Quick Tips
Charging (Desktop Holder)
With battery inserted in handset, use specified
AC Charger ZTDAA1 (sold separately) together
with Desktop Holder.
AC Charger and Desktop Holder are not
.
waterproofed or dustproofed. Do not charge
battery while handset is wet.
Handset and AC Charger may warm while
.
charging.
1
Insert Charger Connector into
Desktop Holder
Insert Charger Connector into Desktop
.
Holder.
2
Extend blades and plug AC Charger
into AC outlet
3
Place handset onto Desktop Holder
Push handset as shown until it clicks into
.
place.
Illumination Light glows while charging.
.
Illumination Light goes out when battery
.
is full.
4
Disconnect handset from Desktop
Holder, then unplug AC Charger
Before Using Handset
Accessories
Battery (SH
●●
)
.
Desktop Holder (SH
●●
)
.
Micro USB Data Cable (SHDDL1)
.
Micro USB Charging Adapter (SHCDL1)
.
microSDHC Memory Card (complimentary
.
sample)
Battery Installation
1
Remove Battery Cover
Battery
Cover
Notch
Use Notch to open Cover. Push Cover up
.
as shown, then lift to remove it.
2
Insert battery
Recycling Symbol
Side
With recycling symbol up, align battery
.
terminals with contacts.
3
Close Battery Cover
Press firmly
along edges
Fit Cover top into slots, then press down
.
firmly.
Close Battery Cover firmly. Debris trapped
.
between Cover and base may expose
handset to liquid/dust.