User Manual

99
j07_2_dr40.fm
[99/109] ~~~~~ ~~~~~ ~~~~~ ~~~~~ ~~~
そ
の
他
1 Slide the back cover lever to unlock (1), hook a nail on the slot and
remove the back cover (2)
2 Pull out the tray straight (1). Set the UIM on the tray
with the IC (gold) side turned down (2) and push
the tray all the way in (3)
3 Turn a recycle mark side up, match tabs and
attach the battery pack
4 Insert the tab of the top of the back
cover into the FOMA terminal slot
(1), insert it in the direction of the
arrow (2) and securely push five
tab areas down with both hands
(3)
5 Slide the back cover lever to lock
Before Use
Inserting UIM (FOMA card) and battery pack
Slot
Notch
IC (gold)
Tab
123
Tray
Notch
Tabs
Turn off the power and insert the UIM/battery pack while holding the FOMA
terminal with your both hands. Note that excessive force may damage the
FOMA terminal, UIM and battery pack.
The battery pack is not waterproof.
Securely close the back cover. If not closed securely, the back cover may
come off and the battery pack may fall out due to vibration. May damage the
waterproof performance and allow water to seep.
Back cover
Lever
dr40_uj.book 99 ページ ２０１０年３月２３日 火曜日 午後１２時３０分