User Manual

Entering Characters 49
Entering Pictograms and Symbols
1. On the text entry screen, press [Options] and select
“Add Symbol”.
When “Input Language” is set to “English”, the half
width symbols screen is displayed first.
When set to “Traditional Chinese” or “Simplified
Chinese”, the full width symbols screen is displayed
first.
To switch the symbols screen, press A.
To switch to the pictogram history screen, press
C.
To switch the displayed pictogram list on the
pictogram input screen, press A.
2. Select the pictogram or symbol you wish to use and
press B.
Note
• Pictograms are only available for SMS/MMS
messages and Notepad.
Finding an Entry
You can recall Chinese word entries by entering the
first few characters.
The following is an example from the Chinese User
Dictionary.
Please notice the word is already
stored at this example.
1. Press L (3 times quickly),
then long press G and enter
“”.
2. The character “ ” appears at
.
Normally “ ” appears here.
3. Long press O and enter
“”.
This example is
using BoPoMoFo
mode