Operation Manual

92 Organiser
Scanner
With the built-in digital camera, you can read barcodes in QR code
format and also read the text on business cards. The scanned data
can be saved as a Phonebook entry, URL, Email address and text.
Note
• When scanning does not take place, it may be due to one of the
following reasons: type or size of barcode or business card,
scratches, dirt, damage, print quality, light reflection, etc.
Reading Barcodes
“Organiser”
→ “Tools 3” tab → “Scanner” → “Scan
Barcode”
1. Display the barcode using the camera.
2. Press [Scan].
3. Press [Options] and select the desired option.
The options vary depending on the scanned data.
“Save”: The result is saved.
“Send Message”: The result is sent as SMS or MMS.
“Save to Notepad”: The result is saved as text.
“Copy”: The result is copied.
To Set the Focus Mode
“Organiser”
→ “Tools 3” tab → “Scanner” → “Scan
Barcode”
1. Press [Options] and select “Focus”.
2. Select “Auto Focus”, “Macro” or “Manual Focus”.
To Use the Continuous Scanning
“Organiser”
→ “Tools 3” tab → “Scanner” → “Scan
Barcode”
1. In scanning mode, press [Options] and select “Continuous
Scan”.
2. Select “On” or “Off”.
To Set the Mobile Light
“Organiser”
→ “Tools 3” tab → “Scanner” → “Scan
Barcode”
1. Press [Options] and select “Mobile Light”.
2. Select “On” or “Off”.
To Adjust the Exposure
“Organiser”
→ “Tools 3” tab → “Scanner” → “Scan
Barcode”
1. Press [Options] and select “Exposure”.
2. Select the desired exposure.
(M 3-
d
-
d
-4)