Operation Manual

Camera 53
Using the Shake Reduction Function
Both camera shake and subject blur can be reduced using this
function.
“Camera”
→ [Options] → “Modes” → “Shake Reduction”
1. Select “On”.
The Shake Reduction function is activated.
2. Select “Off” when not using this function.
Note
• The Shake Reduction function may not produce the desired
results depending on the subject’s or shooting status.
Using Face Auto Focus
Faces of up to 5 people can be focused on automatically using this
function.
“Camera”
→ [Options] → “Shooting Settings” → “Focus”
1. Select “Face Auto Focus”.
Note
• Certain faces may not be recognized and focused on depending
on the subject’s status.
Continuous Shoot
“Camera”
→ [Options] → “Modes” → “Continuous Shoot”
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”: The continuous shoots are cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures continuously.
After selecting this mode, select from
“Fast”, “Normal”, “Slow” or “Manual”.
“Overlapped” ( ): Overlaps continuous pictures into one
picture and makes an afterimage.
After selecting this mode, select “Fast” or
“Normal”.
Note
• When you select “Manual” to take continuous pictures, press
B manually at the desired speed.
• When “Shake Reduction” is set to “On”, you cannot use the
Continuous Shoot function for picture sizes larger than 240
×
320 pixels.
• When “Shake Reduction” is set to “Off”, you cannot use the
Continuous Shoot function for picture sizes larger than 480
×
854 pixels. “9 Pictures” and “Overlapped” are not available for
picture sizes larger than 240
× 320 pixels.