User Manual

Accessory
Battery (SHBBZ1)
Battery Installation
Remove cover

Press and slide as shown.
.
Insert battery

Close cover

Charging
Use specified AC Charger ZTDAA1 (sold
separately) only.
Small Light
External
Device Port
Port Cover
AC Charger
Blades
AC 100V Outlet
Release
Tabs
Charger
Connector
Arrows
1
2
3
Open Port Cover to connect

AC Charger
Plug AC Charger into AC

outlet
Small Light illuminates red while
.
charging.
Small Light goes out when battery is
.
full.
After charging, unplug AC

Charger, then disconnect
handset
Before Using Handset
ii
USIM Card Installation
Notch
Slide in USIM Card with IC

chip facing down
Insert battery (P.ii)

First power off handset and remove
.
battery.
Do not force USIM Card into/out of
.
handset.
USIM Card must be inserted to use
.
handset.
USIM PINs
PIN
■
4-digit code; activate PIN Entry to restrict
usage.
PIN2
■
Required to clear Call Costs and to set
Max Cost.
PIN and PIN2, 9999 by default, are
changeable.
PIN Lock & Cancellation (PUK Code*)
■
Entering incorrect PIN or PIN2 three
consecutive times locks USIM Card,
disabling handset. Enter PUK Code to
unlock. For details, contact SoftBank
Customer Center, General Information.
USIM Personal Unblocking Key (PUK *
Code) unblocks a USIM Card blocked
after the wrong PIN has been entered
three consecutive times.
Each USIM
Card has a unique PUK Code. Do not
disclose it to unauthorized persons.
iii