User's Manual

26 Voice Call/Video Call Functions
Making a Video Call
Note
• Use this function with only the video call enabled
phones.
• Make sure that the battery is fully charged and the
signal is strong before using this function.
• Turn the loudspeaker on or use a switch-equipped
Stereo Handsfree or handsfree kit so that you can talk
while looking at the video call screen on the display.
• Video calls can only be made and received if you
have 3G coverage. See “Display Indicators” on
page 18.
• During a video call the keypad, battery cover and
camera areas may heat up. This is not a malfunction.
Status Indicators
1. Sub screen for your image
2. Elapsed time
3. Main screen for the calling party’s screen
4. Calling party’s name or phone number
Making a Video Call
1. Enter the area code and the phone number you wish
to dial.
2. Press [Options] and select “Video Call” or press and
hold D or press S to dial.
If you enter the wrong number, press [Clear] to
delete the number to the left of the cursor.
When the line is connected, the image of the called
party is displayed upper on the screen, and yours
lower left.
Tip
• If the called party’s phone is not video call enabled,
you can press F and enter the phone number again
to make a voice call.
• When the call ends, the last call cost is displayed.
1
3
2
4