User's Manual

Settings 97
Backlight
The backlight will shut off if you do not press the keypad for a certain
length of time. You can specify a desired time to elapse before the
backlight shuts off, which will help conserve battery life.
Tip
• When you purchase this phone, Backlight is set to 15 seconds.
To Select the Backlight Time Out
“Settings”
→ “Display Settings” → “Backlight” →
“Time Out”
1. Select the desired time.
Select “Off” to shut it off.
To Adjust the Brightness of the Backlight
“Settings”
→ “Display Settings” → “Backlight” →
“Brightness”
1. Press a (Light) and b (Dark) to switch between 4 levels of
clarity.
2. Press .
Setting the Display Saving
The screen of this phone will automatically turn off after a given
amount of time. You can change the length of time before the Display
Saving goes into effect, which will help conserve battery life.
“Settings”
→ “Display Settings” → “Display Saving”
1. Select the desired time.
When you purchase this phone, Display Saving is set to 2
minutes.
Note
• Display Saving does not work while you are making a call, using
WAP, or using an application.
• To cancel the Display Saving: The display saving continues until
either a key is pressed or there is an incoming alert. The first key
press only cancels this function. You must press another key in
order to enter any numerical or text value.
Setting Video Out
With the optional cable, you can connect your phone to other device,
such as TVs or videos set to output, and display images or video clips
stored on your phone. It is also possible to output and display data
stored in the memory card.
To Set Output Function On
You need to connect your phone to the other device with the optional
cable beforehand.
“Settings”
→ “Display Settings” → “Video Output” →
“Switch On/Off”
1. Select “On”.
Select “Off” on the Output screen when finished.
Note
• When closing your phone, you cannot output data to the connected
device.
• It is not possible to output some images or video clips.
(M 12-2-5)
(M 12-2-6)
(M 12-2-7)