User's Manual

82 Organiser & Tools
Viewing the Memory Status
1. In any view, press [Options] and select “Memory Status”.
Alarms
Setting the Alarms
The alarm function allows you to be alerted at a specified time.
Note that you need to set the current date and time before setting the
alarm function if it has not been done already.
Note
• The alarm will not ring when “Volume” (p. 92) is set to “Silent”.
“Organiser & Tools”
→ “Alarms”
1. Select the blank setting.
2. Enter the desired time.
3. Press [Save].
To Change the Type of Repeat Options
1. On the Set Alarm screen, select “Repeat”.
2. Select from “Once Only”, “Every Day” or “Selected Days”.
“Once Only”: The alarm sounds once only.
“Every Day”: The alarm sounds every day at the specified
time.
“Selected Days”: The alarm sounds on the selected day of the
week at the specified time.
To Change the Type of Alarm Tone or Video Clip File
1. On the Set Alarm screen, select “Assign Tone/Video”.
2. Select “Assign Tone” and then select “Preset Sounds” or “My
Sounds”, or select “Assign Video”.
3. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a Ringtone” on
page 92.
To Change the Snooze of the Alarm Tone
1. On the Set Alarm screen, select “Snooze”.
2. Select the desired snooze option.
To Change the Alarm Volume
1. On the Set Alarm screen, select “Alarm Volume”.
2. Press a (or d) to increase the volume or press b (or c) to
decrease the volume.
(M 7-2)