User's Manual

48 Camera
Selecting the Shutter Sound
“Camera” → [Options] → “Settings” → “Shutter Sound”
1. Select the desired shutter sound from 3 preset patterns.
Note
• Continuous Shoot uses the specialised shutter sound that cannot
be changed from the above settings.
• The shutter sound remains active even when “Ringer Volume”
(p. 93) is set to “Silent” to prevent unauthorised use.
Functions in the Video Camera Mode
Selecting the Recording Size
“Camera”
→ [Options] → “Record Size”
1. Select “For Message” or “Extended Video”.
For Message: Limits the size to send a message
depending on service providers.
Extended Video: Less than 30 minutes (depending on the
memory).
2. Select “QCIF” or “SubQCIF” video format for “For Message”
and “QCIF”, “SubQCIF” or “QVGA(MPEG4)” format for
“Extended Video”.
Note
• If you select “For Message” for the recording size, the file size is
limited depending on the service provider. Therefore, the quality is
also limited for the setting.
• “Save and Send” is not displayed after recording in the Extended
Video mode.
Setting the Picture Size
You can change the picture size during playback/recording.
“Camera”
→ [Options] → “Advanced” → “Picture Size”
1. Select “Large(QCIF)” or “Small(SubQCIF)”.
Recording Video Clips with the Sound
To record a video clip with the sound, the microphone needs to be
activated.
“Camera”
→ [Options] → “Settings” → “Microphone”
1. Select “On” or “Off”.
Note
• The microphone is already turned on in the default setting. Select
“Off” to record a video clip without the sound.
• The file size of a video clip can be reduced if the sound is not
recorded.
Video Encoding
“Camera”
→ [Options] → “Settings” → “Video Encode”
1. Select the appropriate format.