User's Manual

Camera

• The sound can be recorded with a video clip if the microphone is turned on. The default

setting of the microphone is set to “On”. To record a video clip without the sound, turn

off the microphone. For details, see “Recording Video Clips with the Sound” on page 82.

Recording Close-up Video Clips

1. In video camera mode, set the macro switch to the macro position ( ).

2. Press or the side-down key to start recording the video clip.

To cancel macro mode, set the macro switch to the normal position ( ).

Sending Video Clips

“Camera”

1. Press .

Press the camera key in the viewer position of the display.

2. To stop recording, press .

To view the preview before saving, select “Preview”.

3. Select “Save and Send”.

Select the desired way you wish to send.

For details, see “Creating a New Message” on page 85.

Note

• You can send video clips only when “For Message” is selected for the recording time. For

details, see “Selecting the Recording Time” on page 81.

e_j350.book Page 79 Monday, October 25, 2004 6:33 PM