User's Manual

56 Messages
Optimisation
When set “On” (default), double-byte characters such
as European characters with an accent are converted
into single-byte characters and sent.
When “Off”, double-byte characters are sent as
displayed.
Please note that you may be charged double for double-
byte characters sent in an SMS when Optimisation is set
“Off”.
A
→ “Text” → “Settings” → “Optimisation”
1. Select “On” or “Off”.
E-mail
About E-mail Messaging
The E-mail service allows you to send and receive E-
mail messages. E-mail messages of up to 2000
characters can be sent. The size of the E-mail messages
to be received depends on E-mail settings.
Note
• You cannot send E-mail messages with files attached.
If you forward E-mail messages with files attached,
the attached files are deleted.
Creating a New E-mail Message
A
→ “E-mail” → “Create Message”
1. Enter the message.
2. Select the desired recipient from the Contacts List
entries.
If the desired entry does not exist, select “Enter E-
mail Address” and enter the E-mail address.
3. Select “Send”.
After the message is sent, the message is moved to
the Sent box.
Note
• If a message cannot be sent for some reason, the
message stays in the Outbox.
Tip
• You can use the text template to make it easier to
complete the message, and you can add your
signature at the end of the message.
To use the text template, move the cursor to the point
you wish to insert the template. Press [Options] and
select “Text Template”. Select the desired template.
To add the signature, press [Options] and select
“Add Signature”. Select the desired signature.
(M 4-4)