User's Manual

38 Contacts List
For “Via Infrared”
The phone starts searching for an infrared-enabled
device within 20 centimetres.
When detected, the infrared connection is established
and the entry is sent.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
Tip
• You can send your own Contacts List entry. Select
“My Card” in step 1. For details on storing your
information in My Card, see “Registering Your
Information as a Contacts List Entry”.
Receiving a Contacts List Entry
When the phone receives a Contacts List entry, a
confirmation message appears.
1. Press [Yes].
The received entry is registered in the Contacts List.
Press [No] to reject.
Tip
• For details on making Infrared or Bluetooth wireless
settings, see “Connectivity” on page 90.
Registering Your Information as a Contacts
List Entry
You can store your information in the Contacts List.
“Contacts”
→ “Contacts List” → “My Card”
1. Press [Options] and select “Edit/Add Details”.
2. Select the field you wish to fill in, and enter the
relevant information.
3. Press [Save] when finished.
Tip
• You can send your Contacts List entry via Bluetooth
or Infrared. Highlight “My Card” in the Contacts
List and press [Options]. Select “Send Contact” and
then select “Via Bluetooth” or “Via Infrared”.
Dialling a Service Phone Number
Certain SIM cards contain service phone numbers that
can be dialled. Contact your SIM card vendor for more
information. On the Contacts screen, “Service Dialling
No.” is displayed at the bottom of the list.
“Contacts”
1. Select “Service Dialling No.”.
2. Select the desired service phone number.