User's Manual

96 Settings
To Search for Devices to be Paired
For using the Bluetooth wireless function, you need to
search for other Bluetooth wireless technology enabled
devices to establish contact with your phone. Keep your
phone within a distance of 10 metres before searching.
“Settings”
→ “Connectivity” → “Bluetooth” →
“Search for Devices”
The phone starts searching for devices within 10
metres.
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
• If the Bluetooth wireless function is off before
searching, the phone turns the Bluetooth wireless
function on automatically and starts searching.
• If the infrared function is active, the confirmation
screen to deactivate the infrared function is
displayed. Press [Yes] to deactivate.
• You can only select one device for pairing. To change
the paired device, see “Paired Devices”.
Paired Devices
You can activate, rename, and delete the paired device
in the list.
To Activate a Device
“Settings”
→ “Connectivity” → “Bluetooth” →
“Paired Devices”
1. Select the device you wish to activate.
Tip
• You can save battery power by turning the Bluetooth
wireless function off whilst it is not in use. Turn the
Bluetooth wireless function off in “To Turn On or
Off” on page 95 or in “To Turn Off Automatically”.
• During a call, you can divert voice call to the paired
device. Press [Options] and select “Enable
Bluetooth”. If you wish to disconnect the paired
device, select “Disable Bluetooth”.
To Rename a Device
“Settings”
→ “Connectivity” → “Bluetooth” →
“Paired Devices”
1. Highlight the device you wish to rename.
2. Press [Options] and select “Change Name”.
3. Rename the device.