User's Manual

Settings 85
3. Select “Ringer Volume”.
The current volume level is displayed.
4. Press a to increase the ringer volume or press b
to decrease the ringer volume and then press .
To select “Step Tone”, press a at level 5.
To select “Silent”, press b at level 1.
Assigning Ringtone
You can select the ringtone from 28 tones including 5
patterns, 13 sound effects and 10 melodies. You can
also select a sound in Saved Sounds as the default
ringtone excluding the AMR or WAVE format.
“Settings”
→ “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Assign Ringtone”.
4. Select “Preset Sounds” or “My Sounds”.
5. Select the ringtone you wish to use.
To hear the demo play, press . To stop playing,
press again.
6. Press [Options] and select “Assign”.
Note
• If you delete a ringtone that uses a sound in Saved
Sounds, the default ringtone is set.
Vibration
When the vibrator option is set on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
“Settings”
→ “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Vibration”.
4. Select from “On”, “Off” or “On & Link to Sound”.
Tip
• When the “On & Link to Sound” option is selected in
step 4, the vibrator synchronises with your selected
melody to pulse in time with the melody. Please note
that not all melodies support the “On & Link to
Sound” option. Should you select such a melody, only
the “On” option in step 4 will allow vibrator
function.
• When you select “On” or “On & Link to Sound” in
step 4, “ ” is displayed on the stand-by screen.