User's Manual

68 Games & More
Sound Volume
You can set the volume of the application such as sound
effect to one of the five levels or silent. When
“Multimedia Volume” (p. 87) is set to “Silent”, this
setup has priority.
“Games & More”
→ “Settings” → “Sound Volume”
The current volume level is displayed.
1. Press a to increase the volume or press b to
decrease the volume.
Backlight
“Games & More”
→ “Settings” → “Backlight” →
“Switch On/Off”
1. Select from “Always On”, “Always Off” or
“Normal Settings”.
• “Always On”: Lit whilst the application
is operated.
• “Always Off”: Unlit whilst the application is
operated even if a key is pressed.
• “Normal Settings”: Works with the main backlight
setting. (p. 89)
To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to “Off”, the backlight cannot be
turned on from the application.
“Games & More”
→ “Settings” → “Backlight” →
“Blink”
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can
choose whether the operation is enabled or disabled.
When a SMAF file is specified in the application, you
can operate the vibrator set in the SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format)
is a music data format for mobile phones.
“Games & More”
→ “Settings” → “Vibration”
1. Select from “On”, “Off” or “On & Link to Sound”.
When you set “On & Link to Sound”, the sound of
SMAF file in the application is synchronised with
the vibrator.
(M 1-4-2)
(M 1-4-3)
(M 1-4-4)