User Manual

Messages and Signals
135
10. Trouble-
shooting
Display messages (cordless handset)
BASE BUSY This appears if you attempt to access the machine
(for example, to use the Common book for auto
dialing or listen to messages) when it is busy.
BUSY The system is busy (phone/fax on line 2, intercom,
and listening to messages from a cordless handset
cannot take place simultaneously). Wait until the
system is free.
CALL TRANSFER A call is being transferred.
CHARGING The cordless handset is in the charger and the
battery is charging.
CHECK FAX This appears when a problem in the machine
prevents you from storing or editing an auto-dial
number from the cordless handset. The fax machine’s
display shows a message indicating the problem.
HANDSET? The cordless handset is outside of the talking range
of the machine, the power of the machine is off, or the
cordless handset has not been registered in the
machine. If this message appears when you are
talking on the cordless handset (you will also hear
beeps), move closer to the machine and then press
to restore the connection. (In some cases it will
not be possible to restore the connection and you will
only hear a busy signal.)
HOLD A call has been placed on hold by pressing the HOLD
key. To resume the call, press the HOLD key again.
IN CHARGER The cordless handset is in the charger and is fully
charged (the cordless handset can be left in the
charger without damaging the battery).
INTERCOM Your cordless handset is being paged (press the
TALK key to talk), or your cordless handset is paging
the machine or another cordless handset. The
number and name of the other device appear
alternately with INTERCOM.
TALK
all.book Page 135 Wednesday, January 21, 2004 3:38 PM
TINSE4415XHTZPP