User Manual

Sending a Fax by Automatic Dialing
93
4. Sending
Faxes
8 Press .
9 Return to Step 2 to edit or clear another number, or press to
return to the date and time display.
START/MEMORY
STOP
Using an auto-dial number
Once you have stored a fax number, you can use it to send a fax.
♦ When you send a fax by automatic dialing, the machine will normally use
line 2. The machine will only use line 1 if line 2 is busy (or if line 2 is not
connected or disabled).
1 Load the document(s).
• READY TO SEND will appear in the
display.
• If desired, press to set the
resolution and/or contrast.
2 Press (or ) until the name of the other party appears in the
display (if no name was stored, the number will appear).
3 Press . Dialing and transmission begins.
• If the transmission is completed successfully, the fax will beep once.
• If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 119).
RESOLUTION/
RECEPTION MODE
START/MEMORY
all.book Page 93 Wednesday, January 21, 2004 3:38 PM
TINSE4415XHTZPP