User Manual

Transfer Function
76
2 Press once and 4 times.
3 Press once.
4 Press to turn on the Transfer function. (To turn off, press .)
5 Press the number of the box for which
you want the Transfer function to
operate (for the general box, press
).
6 Press to return to the date and time display.
7 Each time the answering system receives a message in the selected box,
it will call your programmed transfer number. When you answer, you will
hear your recorded message telling you that the call is a transfer call. On
the dial pad of your phone, enter , your remote code number (see
page 77) if the general box or a personal box without a passcode was
selected in Step 5, or the box passcode number if a personal box with a
passcode was selected, and then . Your messages will play.
• You can also perform any of the remote operations described in Remote
Operations
later in this chapter (see page 77).
Note: When you hang up after a transfer call, the machine will not
immediately resume normal operation. If you want the machine to accept calls
immediately after a transfer call, enter twice before hanging up (if
hanging up during message playback, first enter and to stop
playback, then enter twice).
STOP
TRANSFER FUNC
TRANSFER FUNC
1=YES, 2=NO
The display briefly shows
your selection, then:
ON TAD FAILURE
all.book Page 76 Wednesday, January 21, 2004 3:38 PM
TINSE4415XHTZPP