User Manual

Optional Answering System Settings
72
1 Press once and once.
2 Press once and 4 times.
3 Press once.
4 Press to select YES (turn on
automatic fax reception), or to
select NO.
5 Press to return to the date and time display.
FUNCTION
STOP
♦ Automatic fax reception NO: The machine will answer after 20 rings, after
which it will wait to receive a remote command. Most callers will hang up
before it answers; however, when you call the machine from a remote
location, you can wait until it answers, listen to your messages, and then
erase them (see
Remote Operations on page 77).
The initial setting is NO . If you want to change the setting to YES, press the
panel keys as follows:
The display briefly shows
your selection, then:
OGM only mode
If needed, you can turn off recording of incoming messages. In this case, your
outgoing message will play, but callers will not be able to leave a message
(this applies to all boxes). The machine will still receive faxes sent by
automatic dialing.
1 Press once and once.
2 Press once and 3 times.
3 Press once.
FUNCTION
Display:
T.A.D. SETTING
ON TAD FAILURE
ON TAD FAILURE
1=YES, 2=NO
OGM ONLY MODE
Display:
T.A.D. SETTING
OGM ONLY MODE
OGM ONLY MODE
1=YES, 2=NO
all.book Page 72 Wednesday, January 21, 2004 3:38 PM
TINSE4415XHTZPP