User's Manual

98 My Stuff
Setting the Tone and Strength
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 96.
2. Press a or b to highlight the file name you wish
to edit, then press A [Options].
The Options menu is displayed.
3. Press a or b to highlight “Set Tone” or “Set
Strength”, then press or A [Select] to select.
For full details, see pages 115 to 117.
Note
• If “Set Tone” and “Set Strength” are not displayed
in the menu in step 2, you cannot change these
settings.
Sending Messages
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 96.
2. Press a or b to highlight the file name you wish
to send, then press A [Options].
The Options menu is displayed.
3. Press a or b to highlight “Send Message”, then
press or
A
[Select] to select.
If you select your original ringtone in step 2, perform
the following, otherwise go to step 5.
4. Press a or b to highlight the file format “SMAF”,
“MIDI” or “i Melody”, then press to select.
5. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 62.
Note
• Sounds with a red icon cannot be sent attached to a
message.
• Only the first part of the data is converted if you
select “i Melody” in step 4.
Deleting Sounds
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 96.
2. Press a or b to highlight the file name you wish
to delete, then press A [Options].
The Options menu is displayed.
3. Press a or b to highlight “Delete”, then press
or
A
[Select] to select.
4. Press a or b to highlight “One Sound” or “All
Sounds”, then press to select.
5. press A [Yes].
To cancel deletion, press C [No] in step 5.