User's Manual

Messages 81
Tip
• If the desired page is not in the list that appears in
step 6, select “Create Subject” in step 5, then enter
the subject code to add a page. For details on the
subject code, contact your service provider.
Setting Languages
Allows you to select your preferred language for the
cell broadcast message display.
1. Perform steps 1 to 3 in “Subscribing to Cell
Broadcasts” on page 80.
2. Press a or b to highlight “Language”, then press
to select.
3. Press .
The language list is displayed.
4. Press a or b to highlight the language you wish to
set, then press to select.
5. Press C [Back] to exit.
Area Info
The Area Info is the message information that operators
sent to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed on the stand-by screen.
Note
• This function may not be available on all mobile
phone networks. Contact your network operator for
more information.
Enabling/Disabling Area Info
1. Press A during stand-by.
2. Press a or b to highlight “Area Info”, then press
to select.
3. Press a or b to highlight “On” or “Off”, then
press to select.
Note
• If Area Info is set to “On”, the stand-by time will
decrease.
(M 4-7)