User's Manual

Messages 75
7. Press a or b to highlight “Send”, then press to
select.
The phone begins the sending process and the SMS
is sent. After the message has been sent, the
message is added to the Sent box.
Note
• When you send a message of more than 160
characters, the confirmation message is displayed.
Press A [Yes] to send or C [No] to cancel.
To Add Recipients
1. Perform steps 1 to 6 in “Sending a Message” on
page 74.
2. Press a or b to highlight “Add Contact”, then
press to select.
3. Press a or b to highlight an item number for
adding recipie
nt’s phone number, then press to
select.
4. Enter the phone number to add, then press .
5. When adding recipients is complete, press C
[Back].
Follow the procedure from step 7 in “Sending a
Message” on page 74.
Reading SMS
Incoming Messages
The SMS indicator ( ) will appear when an incoming
message arrives.
1. When you receive a SMS, press during stand-
by.
2. Press a or b to highlight the message you wish to
view.
The sender’s phone number and a part of the
message are displayed. When the sender’s phone