User's Manual

Messages 69
Tip
• You can reply to a message to all addresses of
selected messages by selecting “Reply All” in step 5.
Forwarding a Message
1. Perform steps 1 to 4 in “Replying to a Message from
the Sender from the Inbox” on page 68.
2. Press a or b to highlight “Forward”, then press
to select.
3. Enter the phone number or e-mail address of the
recipient, then press .
If you wish to select the phone number or e-mail
address in the Contacts List, search for the desired
Contacts List entry.
Press a or b to display the Contacts List. Then
press a or b to highlight the desired entry, then
press to select. For details on searching the
Contacts List entries, see “Finding a Name and
Number” on page 42.
4. Press a or b to highlight “Send”, then press to
select.
Note
• When a message with attached data is forwarded the
data is also sent. However, if there is any data which
the phone recognises as having copyright, then it will
not be sent.
• The “Subject” field is automatically filled in with the
original subject preceded by “Fw:”.
The original message cannot be changed.
Modifying a Message
1. Perform steps 1 to 4 in “Replying to a Message from
the Sender from the Inbox” on page 68.
2. Press a or b to highlight “Edit Message”, then
press to select.
3. Modify the message.
4. Press .
5. Press a or b to highlight “Send”, then press to
select.
Note
• Messages cannot be edited if they contain particular
data such as Slide Show, XHTML, copyrights or an
unknown format.