User's Manual

Camera 57
5. Press a or b to highlight “Save”, then press to
select.
“Saving (file name) to My Stuff…” is displayed,
then the video clip is registered.
If you preview a video clip before saving, select
“Preview” in step 5.
If you wish to send a video clip by multimedia
message after recording the video clip, select “Send
Message” in step 5.
To Switch the Viewfinder
Press P when the preview is displayed through the
main display.
Each time you press P, the viewfinder switches
between the external display and the main display.
Recording Close-up Video Clips
1. In video camera mode, set the macro dial to the
macro position ( ).
2. Press or the side-down key to start recording the
video clip.
To cancel macro mode, set the macro dial to the
normal position ( ).
Using the Zoom Function
Zooming ratio can be altered between “×1” and “×7” in
20 steps. Press c or d to change the zooming ratio.
Selecting Video Quality
1. In video camera mode, press A [Options].
The Options menu is displayed.
2. Press a or b to highlight “Video Quality”, then
press or
A
[Select] to select.
3. Press a or b to highlight “Normal” or “Fine”,
then press to select.
Selecting the Recording Time and Destinations
You can switch the recording time and destination as
follows.
1. In digital camera mode, press
A
[Options].
The Options menu is displayed.
2. Press a or b to highlight the “Record Time”, then
press or
A
[Select] to select.
3. Press a or b to highlight the desired recording
time, then press to select.
Long ( ):
Handset
Normal ( ):
SD card