User's Manual

50 Camera
Taking Pictures
1. Press to display the Main menu.
2. Press a, b, c or d to highlight “Camera”, then
press to select.
3. Press a or b to highlight “Digital Camera”, then
press to select.
The preview is displayed through the main display.
4. Press or the side-down key to take the picture.
The shutter sounds and the still image of the taken
picture is displayed.
5. Press A [Save].
“Saving (file name) to My Stuff…” is displayed,
then the picture is registered.
If you wish to send a picture by multimedia message
after taking the picture, press before step 5.
6. Press F to return to stand-by.
Tip
• Pressing C during stand-by also activates digital
camera mode.
• To leave digital camera mode without registering the
taken picture after step 4 in “Taking Pictures”:
Press F and Press
A
[Yes].
• When the distance to the subject is approximately 5
cm, set the macro dial to the macro position ( ).
When the distance to the subject is approximately 40
cm or more, set the macro dial to the normal position
().
• Your pictures are given file names which are
“pictureNNN” (NNN is a three-digit consecutive
number without an extension.).
To Switch the Viewfinder
You can switch the viewfinder from the main display to
the external display for taking a self-portrait.
Press P when the preview is displayed through the
main display.
Each time you press P, the viewfinder switches
between the external display and the main display.
When you use the external display as the viewfinder,
the taken pictures are saved automatically.
Taking Close-up Pictures
1. In digital camera mode, set the macro dial to the
macro position ( ).
2. Press or the side-down key to take the picture.
To cancel macro mode, set the macro dial to the
normal position ( ).
Using the Zoom Function
Zooming ratio can be altered between “×1” and “×7” in
20 steps. Press c or d to change the zooming ratio.