User's Manual

38 Contacts List
When you store new entries
4. After performing steps 1 to 3, press a or b to
highlight “Save new contacts to”, then press to
select.
5. Press a or b to highlight “Handset”, “Choice” or
“SIM”, then press to select.
When selecting “Choice”, you can choose SIM card
or handset memory every time you store a new
Contacts List entry.
When you wish to change the Contacts List memory
4. After performing steps 1 to 3, press a or b to
highlight “Source”, then press to select.
5. Press a or b to highlight “Handset” or “SIM”,
then press to select.
Tip
• The source indicator (handset: or SIM: ) is
displayed so that you can find the source you are
using.
Creating a New Entry
You can choose either the phone (up to 500) or SIM
card memory locations to store the new entry. For
switching locations, see “Selecting the Contacts List
Memory” on page 37.
The amount of phone numbers that you can store to the
SIM card is dependent on its capacity. Contact your
network operator for details.
If you create a new entry in the handset memory, you
need to enter one of the following: “Name”, “Phone
number” or “E-mail Address”. If you create a new entry
on the SIM card, you need to enter: “Phone number”.
1. Perform steps 1 to 3 in “Displaying the Contacts
List” on page 37.
2. Press A [Options] to display the Options menu.
3. Press a or b to highlight “Add New Contact”,
then press or
A
[Select] to select.
If you select the “Choice” option for the memory to
be used, the selection is between “To Handset
Memory” or “To SIM Memory”.
The “New Entry” screen is displayed.