User's Manual

77 My Phone
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, > and . (full-stop).
Tip
• When “Edit Data” is displayed in the menu in step 2,
you are able to edit the sound (p. 92). Once you have
completed editing the newly saved file overwrites the
old file. This new file then becomes the original ring
tone.
Setting the Tone and Strength
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 76.
2. Press or to select the file name you wish to
edit, then press A [Options].
The Options Menu is displayed.
3. Press or to select “Tone Set” or “Strength
Set”, then press .
For full details, see pages 90 to 92.
Note
• If “Tone Set” and “Strength Set” are not displayed
in the menu in step 2, you cannot change the settings.
Sending Messages
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 76.
2. Press or to select the file name you wish to
send, then press A [Options].
The Options Menu is displayed.
3. Press or to select “Send Message”, then
press .
If you select your original ring tone in step 2;
4. Press or to select the file format “SMAF”,
“MIDI” or “i Melody”, then press .
5. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 99.
Note
• Sounds with a red icon cannot be sent attached to a
message.
• Only the first part of the data will be converted if you
select “i Melody” in step 4.