User's Manual

59 Profiles
Ringer Type
You can select the ring tone from 28 tones including 5
patterns, 13 sound effects and 10 melodies. You can
also select a sound in the Saved Sounds as the default
ring tone excluding the WAVE format.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 57.
2. Press or to select “Assign Melody”, then
press .
3. Press or to select “Preset Melody” or “My
Sounds”, followed by .
4. Press or to select the ring tone you wish to
use.
If you wish to hear the demo, press A [Play].
To stop playing, press A [Stop].
5. When selection is complete, press .
Vibration
When the vibrator option is set to on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 57.
2. Press or to select “Vibration”, then press
.
3. Press or to select “Enable”, “Disable” or
“Link to Sound”, then press .
Tip
• When “Link to Sound” is selected in step 3, melodies
are synchronised with the vibrator for the ring tone.
However, this function may not work depending on
data.
• When you select “Enable” or “Link to Sound” in step
3, “ ” appears on the stand-by screen.