User's Manual

47 Camera
Retaking Pictures
After steps 1 to 4 in “Taking Pictures” on page 45, press
C [Cancel].
Further shooting is available.
Note
• The Digital Camera Uses a CCD Sensor. Although
this camera has been manufactured to the highest
specification, some pictures may still appear too
bright or too dark.
• If the phone has been left in a warm place for a long
time before taking or registering a picture, the
picture quality may be poor.
In the Case of No Available Memory
When the number of pictures that can be taken becomes
4 or less, or when the remaining capacity becomes 27.5
Kbytes (when “Medium” is selected as the picture size)
or less, the remaining shots indicator in the upper left of
the screen turns in red. (The number of pictures that can
be taken is approximate.)
When the number of pictures that can be taken becomes
0, and when you try to take a picture again, “Can not
take a picture. Maximum Capacity” is displayed.
Meanings of Indicators in Still Camera Mode
Remaining shots indicator
000: Indicates the remaining number of pictures
that can be taken.
Flash light indicator
Indicates when the flash light is turned on.
: Normal mode
: Macro mode
Delay timer indicator (p. 49)
: Indicates when Timer is set.
Continuous shooting indicators
Indicates the shooting mode.
: Single shot
: Double shot
: Triple shot
: Quadplex shot
Picture size indicators (p. 46)
Large: 480 × 640 dots
Medium (default): 240 × 320 dots
Small: 120 × 160 dots