User's Manual

Camera 46
To switch the finder
Press P when the preview is displayed.
Each time you press P , the finder switches between
the external display and the main display. When you
use the external display as the finder, the taken pictures
are saved automatically.
Taking Macro Pictures
1. In still camera mode, set the Macro Dial to the
position.
2. Press or side-down key to take the picture.
To cancel macro mode, set the Macro Dial to the
normal position .
Using the Zoom Function
Zooming ratio can be altered between “Wide”, “×2”,
and “×4”. Press A or C to change the zooming ratio.
Note
• When “Select Picture Size” is set to “Small”, you
can use the zoom function in three magnifications
(×1, ×2, ×4).
• When “Select Picture Size” is set to “Medium”, you
can use the zoom function in two magnifications (×1,
×2).
• When “Select Picture Size” is set to “Large”, you
cannot use the zoom function.
To select the picture size
1. Press A [Options] before step 5 in “Still Camera” to
display the Options Menu.
2. Press or to select “Select Picture Size”, then
press .
3. Press or to select the picture size, then press
.
Selecting the Picture Quality
1. In still camera mode, press A [Options].
The Options Menu is displayed.
2. Press or to select “Picture Quality”, then
press .
3. Press or to select “Normal” or “Fine”, then
press .