User's Manual

Call Manager 168
Note
• When a divert is set to “All Calls”, “ ” appears
on the stand-by screen.
Tip
• If you select “By Service” in step 5, you can select the
divert option further in the selected option in step 4.
Checking the Divert Status
1. Perform steps 1 to 3 in “Divert Calls” on page 167.
2. Select the divert option you wish to check, then
press .
3. Press or to select “Status”, then press .
You can now check the status of the selected divert
option.
4. When you have finished, press C [Back].
Cancelling All Divert Settings
1. Perform steps 1 to 3 in “Divert Calls” on page 167.
2. Press or to select “Cancel All”, then press
.
3. Press or to select “Yes”, then press .
To cancel the resetting, select “No” in step 3, then
press .
4. Press A [OK].
All divert settings are cancelled.
To cancel the Divert Settings Individually
1. Perform steps 1 to 3 in “Divert Calls” on page 167.
2. Select the divert option you wish to cancel, then
press .
3. Press or to select “Off”, then press .
4. Press A [OK].
The selected divert has been cancelled.