User's Manual

Settings 124
To Cancel the Display Saving Function
The display saving continues until either a key is
pressed or there is an incoming alert. The first key press
will only cancel the display saver. You must press
another key in order to input any numerical or text
value.
Setting the Greeting Message
You can set the message which will appear when the
phone is turned on.
1. Perform steps 1 to 2 in “To Set Built-in Animations
or Illustrations” on page 121.
2. Press or to select “Greeting Message”, then
press .
3. Press or to select “On”, then press .
4. Enter the message, then press .
Up to 16 characters can be stored as a message.
For details on entering characters, see “Entering
Characters” on page 29.
Tip
• To cancel the Greeting Message setting, select “Off”
in step 3.
Assigning Pictures
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken by a digital camera or images
downloaded from a WAP site can be used.
To Set Built-in Pictures
1. Perform steps 1 to 2 in “To Set Built-in Animations
or Illustrations” on page 121.
2. Press or to select “Assign Pictures”, then
press .
3. Select the screen to set the picture, then press .
4. Select “Animation 1” or “Animation 2”, then press
.
or
Select “picture 1” or “picture 2”, then press
when you select “Alarm” in step 3.
The selected picture is displayed.
5. Press .
Tip
• To cancel the picture setting, select “Default” in step
4.