User's Manual

Caller ID
29
3. Caller ID
Display messages
One of the following messages will appear while the cordless phone rings if
caller information is not available.
NO SERVICE No caller information was received from your telephone
company. Make sure that the telephone company has
activated your service.
CALLER-ID ERROR Noise on the telephone line prevented reception of
caller information.
OUT OF AREA The call was made from an area which does not have a
caller identification service, or the caller’s service is not
compatible with that of your local phone company.
PRIVATE CALL Caller information was not provided by the telephone
company at the caller’s request.
Display example:
A1 JOHN DOE
D2
How Caller ID operates
When you receive a call, the name of the caller will appear next to the line (A1
or D2) in the cordless phone display, beginning just before the second ring.
The information will continue to be displayed until the line is disconnected.
♦ To display the number in addition to the name, press . (To return to the
initial display, press again.)
ENTER
ENTER
A1
JOHN DOE
525-8693
Press
ENTER
♦ To answer the call, press any key (except , , or ) at any time.
Note: Some caller ID services may not provide the name of the caller. In this case,
only the phone number will appear.
OFF
OFF
ENTER
SELECT
LINE
all.bookPage29Tuesday,June11,200210:15AM