User's Manual

Redial
26
Redial
You can automatically redial the last number dialed (regardless of which line
was used).
Note: If the base is unplugged or a power failure occurs, the last number
dialed will be erased.
1 Make sure the desired line is selected, and then press .
• Check the display to make sure the number that appears is the number you
wish to dial. (If the wrong number appears, press to clear it.)
2 Press . The number is automatically dialed.
REDIAL
OFF
OFF
TALK
Changing the Flash Time
The FUNCTION/FLASH key is used to access special services from your
phone company that require subscription. If you find that you cannot access a
service when you press the key as instructed by the phone company, try a
different flash time setting. Three time settings are available.
1 Press once and twice.
2 Press .
3 Press to select a new time setting.
FUNCTION
/FLASH
ENTER
Display:
FLASH TIME
ERASE BOOK
DIRECT #
FLASH TIME
400ms
600ms
400 ms
600 ms
800 ms
Note: You can also redial by pressing first and then . Note that this
method does not allow you to check the number before dialing begins.
TALK
REDIAL
all.bookPage26Tuesday,June11,200210:15AM