User's Manual

Installing and Charging the Battery
13
1. Installation
Connecting a headset
You can connect a headset (purchased separately) to the headset jack.
Remove the cap and insert the connector as shown.
Setting the dial mode for the analog phone line
The cordless phone is set to use tone dialing when you make a call on the
analog phone line. If you are on a pulse dial line, you must set the cordless
phone to use pulse dialing. Press the panel keys as follows:
1 Press once and twice.
2 Press .
3 Press once to select PULSE.
4 Press .
• The display briefly shows your new setting.
FUNCTION
/FLASH
ENTER
ENTER
Display:
ANALOG LINE
TONE
PULSE
ANALOG LINE
TONE
PULSE
DIRECT #
CALLER-ID
ANALOG LINE
all.bookPage13Tuesday,June11,200210:15AM